【資料名稱】：Installation instruction-rus

【資料作者】：ty

【資料日期】：11-11

【資料語言】：英文

【資料格式】：PDF

【資料目錄和簡(jiǎn)介】：

Loading of GSM BTS RUS SW G11B into the BSC and
RBS
This document describes loading of GSM SW for RBS 6000 with DUG
20/[R]RUS configurations into the IOG/APG.
The installation instruction is valid for
Release G11B with support for BSS G11B, BSS G10B, BSS G10A, BSS 09A,
BSS 08B, BSS 08A, BSS 07B
RBS software CXP 104 0013/05 R61E
Before starting the upgrade procedures, it is recommended that all steps
including the fallback procedure has been reviewed.
The Installation Instruction for RBS 6000 with DUG10/RUG11 or RBS 2000
has the document number 1531-LZB 111 1203-35.
Note: Upgrade from BSS G10A or older to BSS G10B or newer requires
manual configuration of each BTS. See chapter 5.3.
Note: It is strongly recommended that all RBS 2000 are upgraded to
GSM/BTS TRU/RUG SW G11B, or to G10A_1, before GSM/BTS RUS SW
G11B is installed on the BSC. The RBS 2000 will then be protected against
accidental loading of GSM/BTS RUS SW.
Ericsson Internal
INSTALLATION INSTR. 2 (26)
Prepared (also subject responsible if other) No.
UABBACK 1531-LZB 111 1203-36 Uen
Approved Checked Date Rev Reference
EAB/FJR/ME [Ulf Hagelberg] ERASARM 2011-06-07 A
Contents
1 Required BSC status .............................................................................3
2 Software..................................................................................................4
2.2 Downloading load files ...............................................................4
2.3 Software name ...........................................................................4
2.4 Software size..............................................................................4
3 Load of RBS SW into the IOG/APG ......................................................6
3.1 IOG20.........................................................................................6
3.2 IOG20M......................................................................................8
3.3 APG40......................................................................................10
3.4 APG43......................................................................................12
3.5 OSS..........................................................................................14
4 Check file size in IOG/APG..................................................................16
4.1 IOG...........................................................................................16
4.2 APG..........................................................................................17
5 Load of RBS SW into the RBS ............................................................18
5.1 Load from IOG or APG.............................................................18
5.1.1 Function Change in One step ..................................................19
5.1.2 Function Change in Two steps.................................................19
5.2 Load from OSS ........................................................................20
5.2.1 Function Change in one step ...................................................20
5.2.2 Function Change in two steps..................................................20
5.3 Upgrade to BSS G10B or newer ..............................................22
5.3.1 SW License and HW activation codes .....................................22
5.3.2 MO MCTR................................................................................22
5.3.3 Function Change in two steps..................................................24
5.3.4 Networks with both TRU/RUG and RUS Configurations..........25
5.3.5 Recommended procedures for Multi drop and TG-synch ........25
6 Fall back procedure .............................................................................26
7 Revision Information ...........................................................................26
8 Minutes of Review................................................................................26